Operation Manual Page 14
If pieces are small, to increase the precision of counting it is recommended
to place a number larger than 10. To do it, press
“UP ARROW”
, then
increase the sampling value to 20, 30, 50 or 100. To decrease, press
“DOWN ARROW”
.
RTEMEMBER THAT TLE GREATER THE SAMPLE QUANTITY, THE
MORE THE MORE YOU ELIMINATE THE CHANCES OF ERROR.
Once desired value is selected, count the number of pieces indicated on the
display, place them on the platter and press
“ENTER”
. Display will stop
flashing and will show sampling value.
Counting
Place the pieces you desire to count (it should be the same unitary weight
from the sampling) on the weighting platter. It can be counted inside a
recipient, if tare has been done before (check Tare Use chapter)
Display will show the total quantity of pieces.
To return to Weight mode in the standard weight unit, press
“U”
.
If you desire to return to piece counting mode using the same unitary weight
than last time, press
“U”
several times still display shows
“PCS”
symbol.
