Operation Manual Page 11
This function allows tare function with recipient or box to be done
automatically, without pressing
“TARE”
button. Display detects the first
weight (recipient or box), then operates tare function (sets to 0), and gets
ready to weight the product in the box or recipient. Afterwards, it sets to 0
and you can start again the same procedure repeatedly without pressing
any button.
Function activation
To enable Auto Tare, follow this instructions:
1. Press
“PLU”
. Display will show
“PLUPro”. Press
“RIGHT ARROW”
several times, still display shows
“AUT-t”.
2.
Press
“ENTER”
. Display will show in the last position one digit, in
accordance with the following meaning:
0
– Unable function.
1
– Enabled Function.
3.
Press
“ENTER”
to confirm. Press
“U/ESCAPE”
to return to
weighting mode
.
Function use
1.
Place the recipient or box on the platter. Scale will operate the tare function
and display will show 0 and tare symbol will be on.
2.
Place the object or objects inside the recipient or box. Display will show net
weight, deducting the tare (recipient/box weight).
3.
Remove all objects from the platter. Display will cancel tare and set to 0.
