32
User’s Manual
PMX_MULTI
Basic Functions | Output Operation
Setting the output-on delay/ off delay time
If the external control for turning the output on or off in the CONFIG settings is set to on (CF04:
ON
), the
delay function cannot be used. Set the external control for turning output on and off to off (CF04:
OFF
).
1
Press OUTPUT ALL to turn off the output.
The output of all channels is turned off.
2
Press DELAY SET (SHIFT+DELAY).
“DELAY SET” appears in the display area.
3
Press SELECT to select the channel you want to configure.
The selected channel is indicated with brackets.
4
Set the output-on delay time using the VOLTAGE knob and the output-off delay
time using the CURRENT knob.
Delay time setting range 0.1 s to 99.9 s
Resolution
1 s, fine mode: 0.1 s
The voltmeter shows the output-on delay time and the ammeter the output-off delay time.
5
To set other channels, repeat steps step 3 and step 4.
6
To exit from the delay time setting, press DELAY SET (SHIFT+DELAY), LOCK, or
SET.
The “DELAY SET” indicator disappears. If you pressed DELAY SET (SHIFT+DELAY) or LOCK, the
measurement display appears. If you pressed SET, the setting display appears.
This completes the setting.
SELECT
OUTPUT
CH1
OUTPUT
ALL
CV
V
s
OFF
CC
A
s
ON
PRL
SER
TRACKING 12
LOCK
REMOTE
L AN
L AN
DEL AY
DEL AY SET
SET OVP
࣭
OCP
PRESET A B C
ALARM
%
%
Output on
Delay
Output off
Delay
Indication of the output-on delay/ off delay time
