102
User’s Manual
PMX_MULTI
Appendix | Troubleshooting
Unable to perform remote control
Memory recall fails.
Check
Possible cause
Remedy
See
When the LAN interface is
in use, is the IP address
being assigned automati-
cally?
Auto IP address assignment by
a DHCP server cannot be final-
ized.
A timeout may have occurred while the
PMX was waiting for a response from
the DHCP server or because no
response was received. Consult your
network administrator.
When the POWER switch is
turned on, does the LAN inter-
face display persist for more
than 30 seconds?
Is “LAN” shown in orange or red
in the display area?
If it is shown in orange, the product is
waiting for a response from the DHCP
server.
If it changes to red afterward, the prod-
uct may have timed out.
Consult your network administrator.
Check
Possible cause
Remedy
See
Is parallel operation or
series operation in use?
The memory contents of CH1
and CH2 saved during normal
operation cannot be recalled
during series operation or paral-
lel operation.
Return to normal mode, or save the set-
tings to memory during series operation
or parallel operation.