Kikusui PLZ-30F, Инструкции по эксплуатации, Страница: 90 / 192

5-32 Application Operation PLZ-U
2. Select the memory number.
Turn the rotary knob to show the number (0 to 3) of the memory to which set-
tings are to be saved.
3. To cancel, press the STORE (SHIFT + RECALL) key again.
4. Press the ENTER key.
The settings described above are saved to the memory.
The STORE key and STORE indicator turn off.
• If settings are already stored at the selected memory number, the settings are over-
written.
Recalling the memory
1. Press the RECALL key.
The display switches to the setup memory number display.
2. Select the number of the memory to be recalled.
Turn the rotary knob to show the number (0 to 3) of the memory to be recalled.
3. To cancel, press the RECALL key again.
4. Press the ENTER key.
The settings in the memory are recalled.
• If a setup memory is recalled while the load is turned on, the load automatically
turns off.
• Note that if you recall a setup memory, the current operation mode and settings
will be changed.
• The recall operation takes up to 2 seconds per channel depending on the length of
the sequence program.
5.13 Factory Default Settings
The backup function of the PLZ-U retains the current settings and memory contents
(ABC preset memories and setup memories) even when the POWER switch is
turned off. However, you can carry out the following procedure to reset the PLZ-U
to factory default settings.
•
For details on the factory default settings, see Table 5-7 and Table 5-8.
• Use caution because the contents of ABC preset memories and the setup memo-
ries are also cleared when the PLZ-U is reset to factory default settings.
NOTE
NOTE
NOTE