Kikusui PAS 10-105, Руководство пользователя

Страница: 104 / 146

7-6 Maintenance PAS SERIES
Filter on the side of the operation panel
1.
As shown in Fig.7-10, pull down the top section of the louver
while pulling the bottom step toward you.
Fig.7-10Removing the louver
2.
Remove the dust filter from the inside of the louver and
clean it.
Remove the dust on the dust filter such as by using a vacuum
cleaner. If the filter is extremely dirty, clean it using a water-
diluted neutral detergent and dry it completely.
• When the unit is in operation, air is sucked through
the dust filter to cool the unit. If moister is included in
the dust filter, the temperature or humidity inside the
unit increases and may cause a malfunction. CAUTION