Kikusui KDS6-0.2TR, Руководство по эксплуатации

Страница: 27 / 60

KDS6-0.2TR Basic Operations and Connections 23
3.3 Connection to the Load
Pin assignment of output connector
The KDS6-0.2TR employs a D-Sub 25-pin female connector for the output connec-
tor.
To connect the KDS6-0.2TR to its load, connect to the output with the D-Sub 25-pin
male connector supplied, using Table 3-2 as a guide.
Table 3-2 Output connector pin assignment
Connector fixing screws
The fixing screws used for the output connector are metric screws (size M2.6).
• Operate the KDS6-0.2TR only with the sensing wires connected. Failure to con-
nect the sensing wires will impair the KDS6-0.2TR’s ability to deliver precise
voltages.
No. Name Remarks No. Name Remarks
1 CH1 + Channel-1 voltage output terminal 14 COM Common output terminal
2 CH1 +S Channel-1 sensing terminal 15 COM S Common sensing terminal
3 NC Not in use 16 NC Not in use
4 CH2 + Channel-2 voltage output terminal 17 NC Not in use
5 CH2 +S Channel-2 sensing terminal 18 NC Not in use
6 NC Not in use 19 NC Not in use
7 CH3 + Channel-3 voltage output terminal 20 NC Not in use
8 CH3 +S Channel-3 sensing terminal 21 NC Not in use
9 NC Not in use 22 NC Not in use
10 NC Not in use 23 NC Not in use
11 NC Not in use 24 NC Not in use
12 NC Not in use 25 NC Not in use
13 NC Not in use
As viewed from the front panel of the KDS6-0.2TR
1 2 3 4 5 6 7
20 19 18 17 16 15 14 25 24 23 22 21
13 12 11 10 9
8
CH3 +
NC
CH2 +S
CH2 +
NC
CH1 +S
CH1 +
COM
COM S
NC
NC
NC
NC
CH3 +S
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
M2.6
Metric screw
M2.6
Metric screw
NOTE