Kidde Fire Systems Argonite Скачать руководство пользователя страница 77

Страница: 77 / 118

7-15

September 2004

Argonite

Engineered Fire Suppression System

38-KFSARG-000

Table 7-9. Estimating Pipe Sizes

Pipe Size

Flow (kg/Minute)

Schedule 40

Schedule 80

Schedule 160

Schdule XXS

min.

max.

min.

max.

min.

max.

min.

max.

1/2 in. (15 mm)

1.30

26.90

0.80

15.30

0.20

3.70

N/A

3/4 in. (20 mm)

3.00

60.10

2.30

46.10

1.30

25.60

N/A

1 in. (25 mm)

5.10

101.60

4.20

84.00

2.90

58.50

1.20

23.30

1¼ in. (32 mm)

8.60

172.30

7.50

149.30

6.20

124.00

3.60

72.80

1½ in. (40 mm)

11.40

228.80

10.10

201.00

8.10

162.70

5.60

111.70

2 in. (50 mm)

18.00

360.90

16.10

321.10

12.50

249.70

10.10

201.80

2½ in. (65 mm)

25.10

501.10

22.40

447.40

19.00

379.70

13.60

272.20

3 in. (80 mm)

37.90

757.30

34.00

679.40

28.10

561.80

22.00

439.30

4 in. (100 mm)

65.10

1302.10

58.70

1173.40

47.30

946.70

39.90

798.10

5 in. (125 mm)

104.90

2097.60

94.70

189370

75.10

1501.70

66.30

1326.90

6 in. (150 mm)

157.50

3149.20

140.30

2805.80

111.40

2227.90

98.30

1965.40

8 in. (200 mm)

298.20

5964.20

267.50

5349.90

205.50

4108.90

209.80

4196.10

7-14

DISTRIBUTION PIPING

The piping system shall conform to the requirements of NFPA 2001. In addition, the system

shall be securely supported with allowances made for agent thrust forces and thermal

expansion/contraction, and should not be subjected to mechanical, chemical, vibration,

corrosion or other damages.
Where explosions are likely, the piping shall be attached to supports that are least likely to

be displaced.
Although Argonite piping systems are not under continuous pressure, provisions should be

made to insure that the type of piping installed can withstand the maximum stress at

maximum storage temperatures.
If black pipe is used, insure that no rust flakes or particles remain inside the pipe as this

would ruin ceiling tiles and/or create a spray of rust/dust, which, in the event of protecting

an enclosure containing delicate equipment such as computers, would unnecessarily damage

the equipment.

Consideration should be given to the fact that the pipe network is open

under normal conditions and that humidity entering the pipe may result in

corrosion. The rust flakes will loosen from the inside of the pipe during a release

and may block orifices in the restrictor or in the nozzles, thus jeopardizing

the agent release/distribution. It is recommended that dirt traps be used

at the last nozzle in the line and at bends.

Содержание Argonite























































































































Результаты поиска

Содержание Argonite

Отзывы:

Похожие инструкции для Argonite

Бренды по названию

Популярные бренды

Kidde Fire Systems Argonite, Инструкция по проектированию, установке и обслуживанию

Результаты поиска

Содержание Argonite

Отзывы:

Похожие инструкции для Argonite

Бренды по названию

Популярные бренды