Kidde Fire Systems Argonite Скачать руководство пользователя страница 5

Страница: 5 / 118

September 2004

Argonite

Engineered Fire Suppression System

38-KFSARG-000

This manual is written for those who are designing, installing or providing maintenance to a Kidde Fire Systems

Argonite

Engineered Fire Suppression System.

IMPORTANT

Kidde-Fenwal assumes no responsibility for the application of any systems other than those addressed in this manual.

The technical data contained herein is limited strictly for information purposes only. Kidde-Fenwal believes this data

to be accurate, but it is published and presented without any guarantee or warranty whatsoever. Kidde-Fenwal

disclaims any liability for any use that may be made of the data and information contained herein by any and all other

parties.
Kidde Argonite Fire Suppression Systems are to be designed, installed, inspected, maintained, tested and recharged

by qualified, trained personnel in accordance with the following:

Standard of the National Fire Protection Association No. 2001, titled

Clean Agent Fire Extinguishing Systems

All instructions, limitations, etc. contained in this manual, P/N 38-KFSARG-000.

All information contained on the system container nameplate(s).

Storage, handling, transportation, service, maintenance, recharge, and test of agent storage containers shall be

performed only by qualified and trained personnel in accordance with the information in this manual and Compressed

Gas Association pamphlets C-1, C-6 and P-1:

C-1,

Methods for Hydrostatic Testing of Compressed Gas Cylinders

C-6,

Standards for Visual Inspection of Compressed Gas Cylinders

P-1,

Safe Handling of Compressed Gases In Containers

CGA pamphlets are published by the Compressed Gas Association, Crystal Square Two, 1725 Jefferson Davis High-

way, Arlington, VA 22202-4102.
Any questions concerning the information presented in this manual should be addressed to:

Kidde-Fenwal Inc.

400 Main Street

Ashland, MA 01721

Phone: (508) 881-2000

Fax: (508) 881-8920

FOREWORD

Содержание Argonite























































































































Результаты поиска

Содержание Argonite

Отзывы:

Похожие инструкции для Argonite

Бренды по названию

Популярные бренды

Kidde Fire Systems Argonite, Инструкция по проектированию, установке и обслуживанию

Результаты поиска

Содержание Argonite

Отзывы:

Похожие инструкции для Argonite

Бренды по названию

Популярные бренды