manualshive.com logo in svg

Kidde Fire Systems Argonite, Инструкция по проектированию, установке и обслуживанию

Компания Kidde Fire Systems предлагает продукт Argonite на основе аргонита для подавления пожаров. Здесь вы найдете руководство по дизайну, установке и обслуживанию, которое можно бесплатно скачать на нашем сайте. Обеспечьте безопасность своего помещения, загружая руководство на manualshive.com.

Поделиться
Скачать
background image

ix

September 2004

Argonite

®

 Engineered Fire Suppression System

38-KFSARG-000

SAFETY SUMMARY

Argonite

®

 fire suppression systems use pressurized equipment; therefore, personnel responsible for fire suppression

systems must be aware of the dangers associated with the improper handling, installation or maintenance of this

equipment.
Fire suppression system service personnel must be thoroughly trained in the proper handling, installation and service

of Argonite  equipment and follow the instructions used in this manual and in the Safety Bulletin and cylinder name-

plate contained in this Appendix.
Kidde has provided warnings and cautions at appropriate locations throughout the text of this manual. These warn-

ings and cautions are to be adhered to at all times. Failure to do so may result in serious injury to personnel.
In addition, Material Safety Data Sheets for Argonite is provided. Personnel must also be familiar with the information

contained on these data sheets.

SAFETY BULLETIN 1, MARCH 2, 1987

SUBJECT: SAFE CYLINDER HANDLING PROCEDURES

WARNING

!

Pressurized (charged) cylinders are extremely hazardous and if not handled properly are capable

of violent discharge. This may result in serious bodily injury, death and property damage.

Before handling Kidde system products, all personnel must be thoroughly trained in the safe handling of the contain-

ers as well as in the proper procedures for installation, removal, filling, and connection of other critical devices.
READ, UNDERSTAND and ALWAYS FOLLOW the operation and maintenance manuals, owners manuals, service manu-

als, etc., that are provided with the individual systems.
The following safety procedures must be observed at all times:
Moving Container. Containers must be properly secured in place. Containers must not be rolled, dragged or slid, nor

allowed to be slid from tailgates of vehicles. A suitable hand truck, fork truck, roll platform or similar device must be used.
Rough Handling: Containers must not be dropped or permitted to strike violently against each other or other surfaces.
Storage: If storing upright, containers must be stored where they are not likely to be knocked over, or the containers

must be secured.
For additional information on safe handling of compressed gas cylinders, see CGA Pamphlet PI titled “Safe Handling of

Compressed Gases in Containers”. CGA pamphlets may be purchased from The Compressed Gas Association, Crystal

Square Two, 1725 Jefferson Davis Highway, Arlington, VA 22202.

SAFETY BULLETIN , MAY 1, 1993

SUBJECT: SAFE CYLINDER HANDLING PROCEDURES FOR PRESSURIZED CYLINDERS

Pressurized (charged) cylinders are extremely hazardous and if not handled properly are capable of vio-

lent discharge. This will result in serious bodily injury, death and property damage.

BEFORE handling Kidde system products, all personnel must be thoroughly trained in the safe handling of the contain-

ers as well as in the proper procedures for installation, removal, filling, and connection of other critical devices, such

as flexible hoses, control heads, and safety caps.
READ, UNDERSTAND and ALWAYS FOLLOW the operation and maintenance manuals, owners manuals, service manu-

als, and other information that is provided with the individual systems.
THESE INSTRUCTIONS MUST BE FOLLOWED IN THE EXACT SEQUENCE AS WRITTEN TO PREVENT SERIOUS INJURY,

DEATH OR PROPERTY DAMAGE.

PROTECTIVE CAP

a. Each cylinder is factory equipped with a protective cap installed on the cylinder. This device is a safety feature,

and will provide controlled safe discharge when installed if the cylinder is actuated accidentally.

b. The protective cap must be installed on the cylinder AT ALL TIMES except when the cylinders are connected into

the system piping or being filled.

Содержание Argonite























































































































Отзывы:

Нет отзывов

Похожие инструкции для Argonite

Abus FUAT50020 Manual preview
FUAT50020
Бренд: Abus Страницы: 43

Бренды по названию

Популярные бренды

Загрузить еще бренды