KI Genesis Desking, Руководство по сборке

Страница: 3 / 16

Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
3
Genesis
®
Desking - Privacy Screens
Assembly Instructions
Privacy Screen(s) Installation
(optional) (cont.)
Note: To make installation easier,
have a second technician hold
the privacy screen in place when
attaching screen.
END (B) End-of-Run Privacy
Screen Installation
4. Position the privacy screen and
screen-to-table bracket assembly
flush with the rear edge of the
worksurface leaving 1” space
between front surface of the
screen frame and side edge of the
worksurface. Using the brackets as
a template, mark the four attachment
screw hole locations on the
worksurface.
5. Carefully bore four
1
/
8
” diameter pilot
holes at the center of each marked
location, underneath the worksurface
using a cordless power drill. Take
care to not drill too deep, piercing
the worksurface. Drill pilot holes
1
/
2
”
to
3
/
4
” deep.
6. Attach the privacy screen and
screen-to-table bracket assembly to
the worksurface using four #12 x 1”
sheet metal screws (Figure 5).
STR (A) Straight, CLH (C) Corner
Left-Hand & CRH (D) Corner
Right-Hand Privacy Screens
Installation
7. Install privacy screen to corner post
or standard leg bracket and trim
casting using two
1
/
4
-20 x
3
/
4
” Allen
socket screws (Figure 6 & Detail A).
8. To adjust privacy screen tilt (if
required), loosen the
1
/
4
-20 x
3
/
4
”
Allen socket head screws and turn
in top OR bottom screw to achieve
vertical adjustment of screen
(Figure 7). Tighten
1
/
4
-20 x
3
/
4
”
Allen socket head screws.
1 1 / -20 x / ”
Allen head
screw
4 2
Figure 6
1 3 / -20 x / ”
Allen head
screw
4 4
trim
casting
set
screw
straight, corner
left-hand or
corner right-hand
privacy screen
corner post
or standard leg
bracket
trim
casting
Detail A
#12 x 1”
sheet metal
screws
#12 x 1”
sheet metal
screws
Figure 5
end-of-run
privacy
screen
screen-to-table
bracket
worksurface
straight, corner
left-hand or
corner right-hand
privacy screen
set screws
1 3 / -20 x / ”
Allen head screw
4 4
Figure 7