TIP:
For Infinitely Adjustable Shelves please skip ahead to “Fine Tuning & Tips.”
At this point you may install accessories (IR Repeater Kit, Power
Conditioner, Etc.) and place components.
TIP:
Socket Screw 1.25”
303-520
(Wood Tops Only)
Socket Screw 1”
(Use with Shelf Peg)
300-455
Optional: Infinitely Adjustable Shelf Kit (See Fine Tuning)
(PHK-2070)
Drop-In Nut
(Use with Shelf Pegs)
300-565
Socket Screw 3/4”
(Use with Shelf Peg)
300-465
Shelf Pegs
300-835
You will need a Phillips head screwdriver to assemble your Chameleon Cabinet.
Rubber Pads
303-380
(Glass Tops Only)
chameleon
ASSEMBLY INSTRUCTIONS
TM
Hex Key 3/16’’
400-060
Hex Key 4mm
400-170
Congratulations on your purchase!
For any questions please call us at:
800.535.5659 / 860.313.0525 (9am-5pm EST)
Visit our website at: www.salamanderdesigns.com
© 2018 Salamander Designs Ltd.
Doc No. 501-500 / v 07.18
Chameleon Hardware
2
Install Shelves
Assemble shelf pegs with
socket screws (300-455).
Affix shelf peg assembly
to post at desired position
and secure using hex key.
Remove plastic coating from shelves and place onto shelf pegs.
C
B
A
LIMITED WARRANTY
Salamander warrants against manufacturing defects for the lifetime of the product.
Salamander will repair or replace, at our option, any product defective in materials or craftsmanship.
Note: Twin cabinet shown. Follow same process for all configurations.
Speaker Grill Removal
(Applicable Models Only)
Remove by lifting up and out.
A
Media Drawer Assembly
Set drawer liner (303-555)
on bottom of tray.
Place media organizer
(303-310).
Note: Horizontal grooves.
Media Organizer
Drawer Liner
A
B
Chameleon Options
1
Level Cabinet
Prior to installing components, it is important to level the cabinet with the floor.
Verify that all of the feet are properly adjusted to support the cabinet evenly.
Leveler Foot
Loosen jam nut with supplied wrench
and tighten to the locked position.
Wrench included.
Jam Nut
Wood Block Foot
Lift cabinet and adjust leveler by hand.
Leveler
(Applicable Models Only)
