Design Collection - Itoki Table
Assembly Instructions
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
3
Figure 3
1/4-20 x 1”
Flat Hd
M6x20mm
Socket Hd
Figure 4
5. Position one of the leg assemblies
over the threaded inserts in the
top and loosely attach the leg
to the surface with the provided
hardware (Figure 3).
6. Attach one end of the cross
brace to the connector casting/
leg assembly using the hardware
provided. After all three of these
bolts are started, tighten the
hardware (Figure 4).
