Assembly Instructions
Design Collection
Itoki Table
March 2013
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Leg
connector
castings (Qty. 4)
Table leg
(Qty. 4)
Worksurface
(Qty. 1)
Leveling
glide (Qty 4)
Leg
mounting
plate (Qty 4)
Table Leg
cross brace
(Qty 4)
M8 x 25mm Flat Hd.
cap screw w/patch (Qty. 4)
1/4-20 x 1” Flat Hd.
cap screw w/patch (Qty. 8)
M8 x 35mm Button Hd.
cap screw w/patch (Qty. 4)
M8 x 16mm Button Hd.
cap screw w/patch (Qty. 8)
M6 x 20mm Socket Hd.
cap screw w/patch (Qty. 4)
Recommended tools
• Safety Glasses
• Level
• English and Metric Hex Head
wrenches
• Electric Screwdriver
• Phillips head drive bits (#2)
• Masking tape or similar
Overview
This installation manual is organized
in the recommended installation order.
42 x 42 Table
1. Unpack the worksurface and lay it
face down on a smooth protective
surface (carpet). Unpack the leg
and mounting plate sets. Identify
all of the parts.
2. Unwrap the hardware pack and
identify all of the parts.
