6
Design Collection - Itoki Table
Assembly Instructions
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
M8x25mm
Flat Hd. w/patch
Glides
M8x25mm
Flat Hd.
M8x35mm
Button Hd.
Figure 6
Figure 7
3. Attach each “Y” shaped connector
casting to two legs. The
connector should be secured
to each leg with two screws per
leg (four screws per connector).
Tighten all of the screws (Figure
6). M8x35mm Button Hd.
4. Secure the stringer tube to the
open end of each “Y” shaped
connector using flat screws as
shown (Figure 7).
5. Install glides in the four leg ends.
Turn about halfway in (Figure 7).
