2
Design Collection - Itoki Table
Assembly Instructions
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Figure 1
Figure 2
M8x25mm
button Hd
w/ Patch
M8x16mm
button Hd
glide
M8x25mm
Flat Hd
w/ Patch
3. Loosely assemble one leg con-
nector casting to one leg using
two bolts as shown in Figure 1.
Leave the hardware loose at this
time. Repeat for the other three
legs.
4. Thread glides onto the bottom of
each leg; turn the glides in about
half way. Attach the leg mounting
plates to the top of each leg using
the screws shown (Figure 2).
Repeat for the other three legs.
