4
Design Collection - Itoki Table
Assembly Instructions
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Figure 5
7. Proceed in this manner with the
other three legs and connector cast-
ings, attaching each assembly to the
cross brace and to the worksurface
(Figure 5).
After completing all four legs the
assembly should look like the image
here (bottom of Figure 5).
8. Tighten all of the hardware at this
time. Turn the table over and move
it to the desired position. Level
the table by turning the glides as
necessary.
