Design Collection - Itoki Table
Assembly Instructions
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
5
Table leg
(Qty. 4)
Oval worksurface
(Qty. 1)
Table leg
stringer tube
(Qty. 1)
Worksurface
stringer bar
(Qty. 2)
Table leg
“Y” connector
(Qty. 2)
Leveling
glide (Qty 4)
M8 x 25mm Flat Hd.
cap screw (Qty. 2)
1/4-20 x 1 ½” Flat Hd.
cap screw w/patch (Qty. 4)
1/4-20 x 1” Button Hd.
cap screw (Qty. 12)
M8 x 35mm Button Hd.
cap screw w/patch (Qty. 4)
M8 x 25mm Flat Hd.
cap screw w/patch (Qty. 4)
M8 x 16mm Button Hd.
cap screw w/patch (Qty. 8)
42 x 70, 42 x 82, 42 x 94 Tables
1. Unpack the worksurface and lay it
face down on a smooth protective
surface (carpet). Unpack the leg
and stringer sets, identify all of
the parts.
2. Unwrap the hardware pack and
identify all of the parts.
