1
Introduction
22
Keysight U1731C/U1732C/U1733C User’s Guide
To power OFF your LCR meter, press the power-on button again.
Automatic Power-Off (APO)
Your LCR meter automatically turns off after 5 minutes (default) if no keys are
pressed. Pressing any key will turn the LCR meter back on after it is powered off
automatically.
The
annunciator is shown on the bottom left of the display when the APO
function is enabled.
Enabling the backlight
If viewing the display becomes difficult in low-light conditions, press
for more
than 1 second to activate the LCD backlight.
To conserve battery life, a user-adjustable time-out controls how long the
backlight stays on. The default time-out is 30 seconds.
NOTE
You can change the power-on behavior of your LCR meter for subsequent power
cycles. See
“Changing the initial power-on behavior”
information on changing the LCR meter’s power-on setting.
NOTE
– To change the time-out period or completely disable the APO function, refer
“Changing the auto power-off and backlight time-outs”
– If an external power adapter is used, the APO function will be disabled.
Tol%
NOTE
– To change the time-out period or completely disable the backlight, refer to
“Changing the auto power-off and backlight time-outs”
.
– If an external power adapter is used, the backlight time-out will be disabled.
Содержание U1731C
Страница 1: ...Keysight U1731C U1732C U1733C Handheld LCR Meter User s Guide ...
Страница 12: ...12 Keysight U1731C U1732C U1733C User s Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...
Страница 16: ...16 Keysight U1731C U1732C U1733C User s Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...
Страница 40: ...1 Introduction 40 Keysight U1731C U1732C U1733C User s Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...