Features and Functions
2
Keysight U1731C/U1732C/U1733C User’s Guide
53
Measuring dissipation factor/quality factor/phase angle (D/Q/
θ
)
The dissipation factor (D), quality factor (Q), and phase angle (
θ
) values can be
displayed interchangeably by pressing the
key when the LCR meter is set to
the inductance, capacitance, or impedance measurement mode.
This setting is not applicable for DCR measurement.
Changing the test frequency
The test frequency is set to 1 kHz by default. Press the
key to select a desired
test frequency.
Selecting parallel/series circuit mode (P/S)
The LCR meter can display parallel (
) or series (
) mode data for
all ranges.
Press the
key for more than 1 second to toggle the parallel and series mode.
Series mode is set as the default setting. You can, however, change this power-on
behavior in the Setup menu. See
“Changing the initial power-on behavior”
page 70 for more information on how to change the default measurement mode
(parallel or series) for subsequent power cycles.
Limit
DQO
Freq.
Table 2-5
Available test frequencies
Model
100 Hz
120 Hz
1 kHz
10 kHz
100 kHz
U1731C
✔
✔
✔
-
-
U1732C
✔
✔
✔
✔
-
U1733C
✔
✔
✔
✔
✔
P
S
ZLCR
Содержание U1731C
Страница 1: ...Keysight U1731C U1732C U1733C Handheld LCR Meter User s Guide ...
Страница 12: ...12 Keysight U1731C U1732C U1733C User s Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...
Страница 16: ...16 Keysight U1731C U1732C U1733C User s Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...
Страница 40: ...1 Introduction 40 Keysight U1731C U1732C U1733C User s Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...