Keysight N1000A DCA-X Series, Быстрый старт

Страница: 14 / 46

14 N1000A Quick Start Guide
1
Introduction
Safety Information
This product has been designed and tested in accordance with accepted industry
standards, and has been supplied in a safe condition. The documentation contains
information and warnings that must be followed by the user to ensure safe
operation and to maintain the product in a safe condition.
Installation Category: Installation Categories (overvoltage categories) are
determined by the transient overvoltage levels that may be expected. CAT I: Mains
isolated. CAT II: Line voltage in appliance and to wall outlet. CAT III: Line voltage
behind wall outlet to next level of distribution.
NOTE
Is your product software up-to-date? Keysight periodically releases software updates to fix
known defects and include product enhancements. To search for software updates for your
product, go to www.keysight.com/find/TechSupport.
WARNING
If this product is not used as specified, the protection provided by the equipment
could be impaired. This product must be used in a normal condition (in which all
means for protection are intact) only.
WARNING
No operator serviceable parts inside. Refer servicing to qualified service personnel.
To prevent electrical shock do not remove covers.
WARNING
This is a Safety Protection Class 1 Product (provided with a protective earthing
ground incorporated in the power cord). The mains plug shall only be inserted in a
socket outlet provided with a protective earth contact. Any interruption of the
protective conductor inside or outside of the product is likely to make the product
dangerous. Intentional interruption is prohibited.
CAUTION
This product is designed for use in INSTALLATION CATEGORY II and POLLUTION
DEGREE 2 environment.
NOTE
Install the instrument according to the enclosure protection provided. This instrument does
not protect against the ingress of water. This instrument protects against finger access to
hazardous parts within the enclosure.