Keysight N1000A DCA-X Series, Быстрый старт

Страница: 23 / 46

Installing the N1000A
2
N1000A Quick Start Guide 23
WARNING
To avoid injury, use a cart or similar device when transporting the instrument. When
lifting the instrument, use safe lifting techniques. Lift with your legs, not with your
back. Always employ at least two persons who have been trained in safe-lifting
techniques.
WARNING
The Mains wiring and connectors shall be compatible with the connector used in the
premise electrical system. Failure, to ensure adequate earth grounding by not using
the correct components may cause product damage, and serious injury.
NOTE
Install the instrument so that the detachable power cord is readily identifiable and is easily
reached by the operator. The detachable power cord is the instrument disconnecting device. It
disconnects the mains circuits from the mains supply before other parts of the instrument. The
front panel switch is only a standby switch and is not a LINE switch. Alternatively, an externally
installed switch or circuit breaker (which is readily identifiable and is easily reached by the
operator) may be used as a disconnecting device.
CAUTION
Windows registry: If the N1000A is mounted in a rack or cabinet, do not use the
system power switch to disconnect power from the instrument. Instead, use the
N1000A front-panel power switch. Using the system power switch may corrupt the
Windows registry requiring you to perform the recovery procedure to restore normal
operation to the N1000A.
NOTE
Should the Declaration of Conformity (DOC) be required, contact an Keysight Sales
Representative or the closest Keysight Sales Office. Alternately, contact www.keysight.com.