Keysight M9514A, Руководство по подготовке места и установке

Страница: 30 / 46

32 Keysight M9514A Site Preparation and Installation Guide
Rack Mount the Chassis Procedure
6
Attach the support rails to the rack’s inside vertical columns. Use four clip-on
sheet metal nuts (also called channel nuts) and the four 10-32 x 0.5 support
rail-to-rack pan head screws as shown in Figure 6.
7
Refer to Figure 7 as a template for placing the clip-on sheet metal nuts. Mark
the position the flange mounting holes on the rack’s vertical columns where
the chassis is to be mounted. Slide clip-on sheet metal nuts over the rack
holes to be used by the rack mount flanges.
Figure 6 Attach the Support Rails to the Rack
10-32 x .5
Pan Head screws
Clip ‐ on sheet metal nuts
2 required for each rail
On Agilent racks, bottom
of rail aligns with arrow
marking EIA units.
For detailed chassis dimensions, refer to Appendix A in the M9514A
Service Guide.