Keysight M9514A, Руководство по подготовке места и установке

Страница: 12 / 46

14 Keysight M9514A Site Preparation and Installation Guide
Introduction Plan the Chassis Installation
Other considerations
Computer requirements, software, etc.
To install and run the required software (Microsoft .NET, Agilent IO Libraries
version 16.3 Update 2 or later, and chassis device drivers), the host PC requires
the following:
Agilent’s M9536A AXIe Embedded Controller requires Windows Embedded
System 7 32- or 64-bit Operating System. 8 GB RAM minimum recommended.
In addition, the host PC must be able to enumerate the AXIe chassis.
Local Area Network
Your Agilent M9514A AXIe chassis communicates with
the external host pc either by PCIe connection or by IEEE 802.3 Local Area
Networking (LAN). All the necessary software and licensing comes with the
chassis but you will need to purchase and install the cabling and associated
hardware external to the chassis. Refer to the M9514A and M9521A User Guide
for additional information.
This product is designed for use in Installation Category II Pollution
Degree 2.
Recommended
Operating System Windows 7 (SP1), 32-bit or 64-bit
Windows 8.1, 32-bit or 64-bit
Browser Microsoft Internet Explorer 6 (or later)
Processor 800 MHz or greater
Minimum RAM 4 GB for 32-bit OS
8 GB for 64-bit
Available Hard Disk Space 1.5 GB
Graphics Support for DirectX 9 graphics with 128MB
graphics memory recommended
Many computers are not capable of enumerating a sufficient
number of PCIe slots to ensure that slots in an external chassis are
enumerated. Agilent maintains a PXI and AXIe Modular
InstrumentationTested Computer List -- Technical Note the
integrated, rack mount, desktop and laptop computers that have
been verified to properly enumerate PCIe devices in the AXIe
chassis, at www.agilent.com/find/axie-chassis .
Agilent’s M9536A Embedded Controller must have BIOS AG16 or
later.