Keysight InfiniiMax III+ Series, Руководство пользователя

Страница: 53 / 162

Using InfiniiMax III+ Probe Heads
2
InfiniiMax III+ Series Probes User’s Guide 53
Tip-span entry for probe calibration
When calibrating the probe, you will be prompted to enter the span setting on the
oscilloscope’s Probe Calibration dialog box. To determine the tip span, do the
following steps:
1
Adjust the browser’s tip span for your measurement.
2
Locate the tip-span gauge on the browser’s protective cap as shown in
Figure 36 .
3
Determine which of the three possible tip-span settings most closely matches
the browser’s tip span.
Figure 36 Tip Span Gauge on Browser Protective Cap
Mounting the Browser
There are two holes on the back side of the browser. Use these holes to mount the
browser to a customer designed holder. Figure 37 below shows the dimensions of
these mounting holes.
Figure 37 Dimensions of Mounting Holes