Keysight 1000B Series, Руководство пользователя

Страница: 134 / 148

134 Keysight 1000B Series Oscilloscopes User’s Guide
6
Oscilloscope Utility Settings
To select internal/external mask storage location
1 In the Mask menu ( [Utility] > Mask Test > MaskSetting ), press Location to toggle
between:
To save a mask
1 In the Mask menu ( [Utility] > Mask Test > MaskSetting ), press Save .
2 If the External mask storage location has been selected, use the Disk Manager
to name and save the mask file. See “Using the Disk Manager” on page 116.
To recall a mask
1 In the Mask menu ( [Utility] > Mask Test > MaskSetting ), press Recall .
2 If the External mask storage location has been selected, use the Disk Manager
to select and load the mask file. See “Using the Disk Manager” on page 116.
To export/import masks
1 Because you can only export and import masks from an external drive, select
the External mask location. See “To select internal/external mask storage
location” on page 134.
2 In the Mask menu ( [Utility] > Mask Test > MaskSetting ), press Imp./Exp. .
3 Use the Disk Manager to select the file and import or export the mask. See
“Using the Disk Manager” on page 116.
Internal Masks are saved and loaded from oscilloscope internal
memory.
External Masks are saved, loaded, exported, and imported from an
external USB drive.
NOTE
When importing a mask while the Location is Internal or when importing or recalling a mask
while the Location is External , the mask is imported or recalled to internal memory. To
activate the mask, you must set the Location to Internal , then Recall from internal memory.