Keysight Technologies U3047AE04, Руководство пользователя и сервисное руководство

Страница: 36 / 81

30 User’s and Service Guide U3047-90002
U3047AE04 Controlling the U3047AE04 with N5247A
Figure 27 Interface Control
Enable Interface Control: (1)
Enables and disables ALL Interface Control communication. When cleared (default setting)
Interface Control is disabled and NO data is sent. To send data, the individual interfaces must
also be enabled.
Test Set I/O Control (addr.data): (2)
Provides control of the Test Set I/O Interface on the rear panel of the PNA-X. Used to control
your Test Set.
Only positive integers are allowed to select switch positions or states of DUT control interface
lines. Refer to
“Address and Data Values” on page 35 .
Address and data integers must be separated by a period. Each set of entries should be
separated by a new line, or carriage return. The front panel Enter key can be used to insert a new
line into the field. The quantity of Test Set I/O entries that can be entered is limited by the
available memory of the PNA-X.
Address and Data example: addr.data
(3)
0.0
16.1
32.2
Channel: (4)
Specifies the channel number for dialog settings. Each channel is configured individually. The
drop-down list illustrates the channels that currently have measurements. There must be at
least one displayed trace for the Test Set I/O Interface to function.
Channel Control Label: (5)
Specifies the label to be displayed on the PNA-X screen during the channel sweep.
(1)
(2)
(3)
(4) (5)
(7)
(8)
(8)
(6)