Keysight Technologies RF PA/FEM, Руководство для стартапов

Страница: 22 / 48

Step 2: Install the PXI Modules
Before installing the PXI Modules
Refer to the following figure for M9021A switch locations and positions.
5. Install the M9021A Cable Interface Module into the chassis:
a. While holding the module by the injector/ejector handle and making sure
the injector/ejector handle is pushed down in the unlatched (downward)
position, slide the M9021A module into chassis, using the slot guides (top
and bottom).
b. Sliding the module into position, when you begin to feel resistance, pull
up on the injector/ejector handle to fully inject the module into the
chassis backplane connectors.
22 Keysight Y1299A-004 RF PA/FEM Reference Solution Startup Guide