Keysight Technologies RF PA/FEM, Руководство для стартапов

Страница: 13 / 48

Introduction
Items You Will Need
Keysight Y1299A-004 RF PA/FEM Reference Solution Startup Guide 13
Items You Will Need
To complete the startup process and begin using the solution, you will need the
following items:
Pozidriv P1 or slotted screwdriver to secure the modules into the chassis
Adjustable torque wrench (at minimum, accommodate an 8 Lb-In [0.904 Nm]
torque on SMA connectors).
If your solution contains an embedded controller, such as the M9036A or
M9037A:
Monitor with M9036A - Use the DVI-to-VGA adaptor (an accessory to the
M9036A) if necessary.Monitor with M9037A - Use the Display Port to
VGA adaptor (an accessory to the M9037A) if necessary.
USB compatible keyboard
USB compatible mouse
If you are installing the software from CDs onto an embedded controller, you
may wish to use a USB CD/DVD drive. As an alternative, copy the installer files
to a computer, transfer the installer files to a USB flash drive, and install the
software from the USB flash drive.
A high-quality SMA (male) to SMA (male) cable at least 10 inches (25.4 cm)
long. This cable is used in
Step 6: Make a Measurement (page 38) . If you are using a
signal generator other than the Keysight M9381A PXIe Vector Signal Gen-
erator, the cable end at the signal generator RF Output may be different.