Keysight Technologies RF PA/FEM, Руководство для стартапов

Страница: 24 / 48

Step 2: Install the PXI Modules
Before installing the PXI Modules
Install the M9381A and M9393A Instrument Modules
Plan your module positions. Install the left-most module first and then continue
installing modules from left to right according to the following illustration.
When installing each
module:
1. While holding the
module by the inject-
or/ejector handle and
making sure the inject-
or/ejector handle is
pushed down in the
unlatched (down-
ward) position, slide
the module into
chassis, using the slot
guides (top and bot-
tom).
2. Sliding the module into position, when you begin to feel resistance, pull up on
the injector/ejector handle to fully inject the module into the chassis backplane
connectors.
3. Tighten the module retaining screws (top and bottom) and torque them to 5 Lb-
In (0.57 N-m).
PXI Module Slot Location
M9381A with M9393A
Slot # Module
1 M9036A or M9037A Controller
2 M9311A
3
4 M9310A
5 M9301A
6 M9214A
7 M9308A
8 M9365A
9
24 Keysight Y1299A-004 RF PA/FEM Reference Solution Startup Guide