Keysight Technologies N9330B Скачать руководство пользователя страница 15

Страница: 15 / 107

Getting Started

Safety Considerations

Keysight has designed and tested the N9330B in

accordance with IEC Publication 61010-1 Safety

Requirements for Electrical Equipment for Measurement,

Control and Laboratory Use, and the tester is supplied in

a safe condition.

Read the following safety notices carefully before you

start to use this tester set to ensure safe operation and

to maintain the product in a safe condition.

WARNING

Personal injury may result if the tester’s cover is removed. There

are no operator-serviceable parts inside. Always contact

Keysight qualified personnel for service. Disconnect the product

from all voltage sources while it is being opened.

WARNING

This product is a Safety Class I tester. The main plug should be

inserted in a power socket outlet only if provided with a

protective earth contact. Any interruption of the protective

conductor inside or outside of the product is likely to make the

product dangerous. Intentional interruption is prohibited.

WARNING

Electrical shock may result when cleaning the tester with the

power supply connected. Do NOT attempt to clean internally.

Use a clean soft cloth to clean the outside case only.

WARNING

Danger of explosion if the battery is incorrectly replaced.

Replace only with the same or equivalent type recommended.



Do NOT dispose of batteries in a fire. Do NOT place batteries in

the trash. Batteries must be recycled or disposed of properly.

WARNING

Always use the three-pin AC power cord supplied with this

product. Failure to ensure adequate earth grounding by not

using this cord may cause personal injury and product damage.

Содержание N9330B












































































































Результаты поиска

Содержание N9330B

Отзывы:

Похожие инструкции для N9330B

Бренды по названию

Популярные бренды

Keysight Technologies N9330B, Руководство пользователя

Результаты поиска

Содержание N9330B

Отзывы:

Похожие инструкции для N9330B

Бренды по названию

Популярные бренды