30 Keysight N5280A User’s and Service Guide
N5280A
Operational Check
-
The receiver access input dynamic range is calculated as the difference
between the receiver access input low-level noise floor, and the source
maximum power to the receiver that results with a typical 0.1dB compression
level.
Low-level noise floor measured with 50 Ohm load at the port.
The effective dynamic range must take measurement uncertainties and
interfering signals into account. This set-up should only be used when the
receiver input will not exceed its compression or damage level.
Table 13
Dynamic Range
Dynamic Range @ 10 Hz IF Band wid th
Frequency
Typical (dB) Direct
Receiver Access
Input
Typical (dBm)
Low-Level Noise
Floor
Typical (dBm) Max
Power
1
1. RCVR IN @ 0.1 dB typical compression at max power.
10 MHz to 50 MHz
13
50 MHz to 100 MHz
13
100 MHz to 500 MHz
13
500 MHz to 2 GHz
13
2 GHz to 20 GHz
13
20 GHz to 24 GHz
13
24 GHz to 26.5 GHz
13
Содержание N5280A
Страница 32: ...32 Keysight N5280A User s and Service Guide N5280A Operational Check Figure 21 LO AUX Output...
Страница 34: ...34 Keysight N5280A User s and Service Guide N5280A Operational Check Figure 22 IF Config...
Страница 50: ...50 Keysight N5280A User s and Service Guide N5280A Regulatory Information...
Страница 55: ...Installation Note Xxxxx xxxxx 3...
