manualshive.com logo in svg

KEYLESS KE-350, Инструкция по установке и эксплуатации

Поделиться
Скачать
KEYLESS KE-350 Скачать руководство пользователя страница 7

KE-350 Installation and Operations Manual 
 

 

  

The Installation Procedure 

Required Tools 

You will need the following tools: 

1.  Medium sized, Phillips head screwdriver 
2.  1/8” standard screwdriver 
3. Drill 
4.  1” (25mm) drill bit 

5.  1/2” (16mm) drill bit 
6.  5/32” (4mm) drill bit (For 12-Pad 3x4) 
7.  3/16” (6mm) drill bit (For Thinline 2x6) 

Prepare the Keypad for Installation  

There are different procedures for the two Keypad configurations: 12-Pad 3x4 and 
Thinline 2x6.  Templates for mounting the Keypads are located in Appendix D. 
 
Thinline 2x6  
The Thinline 2x6 is designed for mullion mount applications.  It can also be mounted on 
a wall, pedestal or any flat surface of at least 1 ¾” by 7”.  The composition of the 
mounting surface will determine the fastening method required: 
1.  Select a flat surface (1 ¾ ” by 7”) near the door where you wish to install the keypad. 
2.  Using the Thinline template (located in Appendix D), mark location of holes “A”,” B” 

and “C”.  

3.  Drill the large hole marked “A” using a 1” (25mm) drill bit. 
4.  Place the connector on the back of the keypad in the large hole to verify that the 

keypad mounting holes are aligned with marked holes “B” and “C”.  Make 
adjustments if necessary.  

5.  Drill clearance holes “B” and “C” in accordance with fastening method used. 
6.  Do NOT mount the keypad at this time. 
 
12-Pad 3x4  
The 3x4 keypad is designed to mount to a single gang switchbox or on a wall, pedestal 
or any flat surface of at least 3 ½ by 5 ¼”.  The composition of the mounting surface will 
determine the fastening method required: 
1.  Select a flat surface (3 ½” by 5 ¼”) near the door where you wish to install the 

keypad. 

2.  Using the 12-Pad 3x4 template (located in Appendix D), mark location of holes “A”, 

“B” and “C”. 

3.  Drill the large hole marked “A” using a 1” (25mm) drill bit. 
4.  Place the connector on the back of the keypad in the large hole to verify that the 

keypad mounting holes are aligned with marked holes “B” and “C”.  Make 
adjustments if necessary.   

5.  Drill clearance holes “B” and “C” in accordance with fastening method used.  Be 

careful when drilling hole “C” because of its’ proximity to hole “A”. 

6.  Do NOT mount the keypad at this time. 

4 

Содержание KE-350






























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды