KEYLESS KE-350, Инструкция по установке и эксплуатации

Страница: 14 / 29

KE-350 Installation and Operations Manual
System Programming
Programming Individual Users (Add, Modify, Delete or Temporary Users)
Authorized users (master code holder or any user assigned to a User Group given the
authorization to program users) can program users directly from the keypad. Each Individual
User is assigned to one of the 16 User Groups. Review System Setup,
User Groups and Set the Time Clock before programming individual users.
1.
Enter
✼
1
2.
Enter the Master Code or an authorized user code,
followed by #
Example:
✼
1 123 #
This opens programming and causes Ö
3.
Proceed to any of the following which requires programming:
Red LED Green LED
Slow Flash Solid
Keypad Status after Step Completion
Adding a New User
a) To add a new User, enter 1#
b) Enter the User ID (1 to 499), followed by #
c) Enter the User Code/PIN (any number from
3 to 8 digits that is currently not assigned to
another user), followed by #
d) Enter the desired User Group number in two
digits (01 - 16), followed by #
e) To program an additional User, return to step b
f) If no more Users are to be added, enter
✼ ✼
and return to Step 3
(Notes on Adding New Users: You should hear a triple beep after completing step d. A long steady beep
indicates an error i.e. the selected User ID or User Code is already assigned to another User)
Modifying a Current User
a) To modify an existing user, enter 2#
b) Enter the User ID (1 to 499) you wish to
modify, followed by #
c) To change this User’s Code/PIN
Ö Enter the New User Code, followed by #
Step
;
Beep Red LED Green LED
a) Double Slow Flash Slow Flash
b) Double Slow Flash Fast Flash
c)
Double Slow Flash Fast Flash
d) Triple Slow Flash Slow Flash
Step
;
Beep Red LED Green LED
a)
Double Slow Flash Slow Flash
b) Double Slow Flash Fast Flash
c) Triple Slow Flash Slow Flash
-- or-- To change this User’s User Group
Ö Enter the New User Group number in two digits (01 - 16), followed by #
d) To modify an additional User, return to step b.
e) If no more Users are to be modified, enter
✼ ✼
and return to Step 3
(Notes on Modifying Users: In order to change both the User Code and User Group for the same User ID,
complete either part of step c then return to step b.)
11