KEYLESS KE-350, Инструкция по установке и эксплуатации

Страница: 15 / 29

KE-350 Installation and Operations Manual
Programming Individual Users (continued)
Keypad Status after Step Completion
Deleting a User by User ID
a) To delete a user by User ID, enter 3 #
b) Enter the User ID to be deleted (1 - 499),
followed by #
c) To delete an additional User, return to step b
d) If no more Users are to be deleted, enter
✼ ✼
and return to Step 3
Deleting a User by User Code
a) To delete a user by User Code, enter 4 #
b) Enter the User Code to be deleted,
followed by #
c) To delete an additional User, return to step b
d) If no more Users are to be deleted, enter
✼ ✼
and return to Step 3
Programming a Temporary User
a) To program a Temporary User, enter 5 #
b) Enter a Temporary User Code (3 to 8 digits),
followed by #
c) Enter the number of Hours of Authorized
Entry (01-99), followed by #
d) Return to Step 3
Deleting the Temporary User
a) To delete an active Temporary User
(before it expires), enter 6#
b) Return to Step 3
4.
To print Individual User(s)
a) Enter 9 #
b) To print a specific User, enter the User ID
Step
;
Beep Red LED Green LED
a)
Double Slow Flash Slow Flash
b)
Triple Slow Flash Slow Flash
Step
;
Beep Red LED Green LED
a) Double Slow Flash Slow Flash
b) Triple Slow Flash Slow Flash
Step
;
Beep Red LED Green LED
a) Double Slow Flash Slow Flash
b) Double Slow Flash Slow Flash
c)
Triple Slow Flash Solid
Step
;
Beep Red LED Green LED
a)
Triple Slow Flash Solid
Step
;
Beep Red LED Green LED
a) Double Slow Flash Slow Flash
b) Triple Slow Flash Solid
(1 – 499, 500 for Temporary), followed by #
-- or --
To print all Users, enter 0 0, followed by #
c) To print another User, return to a)
Notes on Printing Individual Users: For security reasons, the master code can not be printed.
5.
Enter
✼ ✼
to complete programming sequence and reset the system to normal operation.
General Notes on Programming Individual Users: Once an authorized user completes steps 1 & 2 to open the
memory, any combination of adding, modifying, deleting Users or programming Temporary Users can be
performed without having to re-enter steps 1 & 2 each time. However, if more than 1 minute elapses between
each step during programming, the system will reset and you will have to start from step 1.
12