Kewaunee Supreme Air Series, Руководство по эксплуатации и техническому обслуживанию

Страница: 20 / 44

VFHOMT-11/18
-
18
Combination Sash
1. Remove the hood Top Front Panel by lifting up and pulling out.
(The panel is attached to the hood front posts by four flat head pins that match to the four
Keyhole Slots in the front of the posts.)
2. Slowly move Sash until a hole in the Front Pulley lines up with the hole in the
Pulley Bracket .
3. Insert a pin such as a bolt or screwdriver through the Pulley and Pulley Bracket .
Clamp the pin in place so that it cannot work loose. Clamp the Belt to the side
of the Pulley Bracket on each side of the hood. The sash drive system is now
locked so that the sash can be removed without the counterweight falling.
4. Remove the screws attaching the Top Front Sash Track to the Sash Frame .
5. Carefully lean the Front Sash Panel and Top Front Sash Track forward.
6. Lower the Top Front Sash Track down and out from the Front Sash Panel
wheels.
7. Individually lift the Front Sash Panel out of the Bottom Track .
8. On back side of sash, remove the center row of screws which hold the C-channel
onto the inside of the Top Rear Sash Track and remove the C-channel .
9. Individually lift the Rear Sash Panel up and out of the Bottom Track and Top
Rear Sash Track .
10. If replacing the glass in the glass pane assembly, continue to step 11. If
replacing the complete glass pane assembly in the sash frame, skip to step 15.
11. Remove bolts from Sash Panel Wheel Bracket Assembly .
12. Separate Inner and Outer Wheel Brackets from Glass .
13. Remove excess tape from Inner and Outer Wheel Brackets and replace with
new 3M VHB double sided tape.
14. Attach Inner and Outer Wheel Brackets to the top edge of the glass and
reinstall bolts. Make sure the Wheel Brackets are seated as far down on the top
edge of the Glass as possible.
15. Insert Rear Sash Panel into rear channel of Bottom Track and tilt back and up
to hook wheels into the Top Rear Sash Track .
16. Install C-channel onto the inside of the rear track and install the center row of
screws on the back of the sash into the C-channel .
17. Install Front Sash Panels into front channel of Bottom Track and stand up
vertically.
18. Hook Top Front Sash Track onto wheels of Front Sash Panels and lift up into
position.
19. Install screws to attach Top Front Sash Track to the Sash Frame .
20. Remove the clamps and pins from the Pulley , Pulley Brackets , and Belts .
21. Replace Top Front Panel
Maintenance Instructions
Sash Glass Replacement Instructions