VFHOMT-11/18
-
30
Installation Instructions
Ceiling Enclosure Installation Instructions
A
1. Fasten
Ceiling Enclosure End Panels
to
Fume Hood Pulley Bracket
tabs
using four (4) #8 x 1" Self-tapping Sheet Metal Screws for each
End Panel
.
2. Insert tabs on
Ceiling Enclosure Front Panel
in slots on
Ceiling Enclosure
End Panels
. Allow
Front Panel
to drop so that the tabs engage the
End Panel
slots.
NOTICE
The
Ceiling Enclosure
is designed to penetrate a standard ceiling
grid. To allow the
Front Panel
to be removable after installation, it is important not
to attach the
Ceiling Grid Angle
to the
Front Panel
. If attachment is required,
use fasteners that can be removed. The
Ceiling Grid Angles
may and should be
fastened to the
Ceiling Enclosure End Panels
.
NOTICE
Verify there is enough space between the
Fume Hood End Panels
and the
Ceiling Enclosure End Panels
to allow the
Fume Hood End Panels
to
be removed and replaced. Add washers or shims to increase the spacing if
required.
Ceiling Enclosure
End Panel
Ceiling Enclosure
Front Panel
Fume Hood
Pulley Brackets
(4) #8 x 1" Self-tapping
Sheet Metal Screws
Содержание Supreme Air Series
Страница 43: ...VFHOMT 11 18 41...
