Kettler KB142-ZXRW, Перевод оригинальной инструкции по эксплуатации

Страница: 56 / 154

MY21K01 - 32_1.0_24.09.2020
56
Operation
6.4 Instruction and customer service
Your supplying specialist dealer will provide
customer service. Contact details can be found on
the pedelec pass for these operating instructions.
The specialist dealer will explain all the pedelec
functions to you in person, this being when the
specialist dealer hands over the pedelec at the
latest. These operating instructions are provided
to you with every pedelec, so that you can consult
them at a later stage.
Your specialist dealer will also be happy to assist
you in the future whether you require
maintenance, conversion or repair.
6.5 Adjusting the pedelec
Only a correctly adjusted pedelec will guarantee
the desired ride comfort and health-promoting
activity. Therefore, adjust the
saddle , the
handlebars and the suspension to your body and
your preferred riding style before the first ride.
6.5.1 Adjusting the saddle
6.5.1.1 Adjusting the saddle tilt
The saddle tilt must be adjusted to the seat height,
the saddle and handlebar position, and the saddle
shape to ensure an optimum fit. The seating
position can be optimised in this way if needed.
First adjust the handlebars, then the saddle.
 Adjust the saddle tilt to horizontal.
Figure 65: Horizontal saddle tilt
6.5.1.2 Determining the seat height

To adjust the seat height safely, either
• push the bike near to a wall, so that the rider can
lean on the wall to support themselves or
• ask another person to hold the pedelec.
1 Climb onto the bicycle.
2 Place your heel on the pedal and extend your
leg, so that the pedal is at the lowest crank
rotation point.
 The rider sits straight on the saddle if the seat
is at an optimum height. If this is not the case,
adjust the length of the seat post to your
needs.
Figure 66: Optimal saddle height
Crash caused by incorrectly adjusted torques
If a screw is fastened too tightly, it may break. If a
screw is not fastened enough, it may loosen. This
will cause a crash with injuries.

Always observe the indicated torques on the
screw or in the
operating instructions .
CAUTION
!