Kettler KB142-ZXRW, Перевод оригинальной инструкции по эксплуатации

Страница: 86 / 154

MY21K01 - 32_1.0_24.09.2020
86
Operation
6.15.1 Using the brake lever
Figure 104: Front (2) and rear (1) brake lever – Shimano
brake used as an example
 Push the left-hand brake lever to apply the front
wheel brake .
 Push the right-hand brake lever to apply the rear
wheel brake .
6.15.2 Using the back-pedal brake
Only applies to pedelecs with this equipment
1 Move pedals a little beyond the 3 o'clock and
9 o'clock position.
2 Pedal in the opposite direction to the direction
of travel until the desired speed has been
reached.
6.15.3 Using ABS
Only applies to pedelecs with this equipment
Accidents on bends and slippery ground
You are at greater risk of falling off if you use ABS
braking on bends. Tyres are more likely to skid on
slippery ground. This poses an increased risk of a
crash with serious injuries.
 Adjust your riding to the current ambient
conditions and your personal riding skills.
Accidents due to extended braking distance
The ABS suppresses blocking on the front wheel.
This can sometimes cause the braking distance
to be longer. This may cause an accident with
serious injuries.
 Adjust your riding to the current ambient
conditions and your personal riding skills.
 Never fool about when riding.
1
2
WARNING
!
Accident due to ABS failure
If the ABS indicator lamp is lit, the ABS function is
not active.
 Adapt riding to the circumstances.
In extreme riding situations, the ABS may not be
able to regulate until the pedelec comes to a halt.
This may cause a crash with serious injuries.

Release the front wheel brake briefly. This
allows you to brake with the ABS function
again.

Adjust your riding to the current ambient
conditions and your personal riding skills.
An ABS malfunction cannot be displayed if the
ABS indicator lamp is defective.
 Check that the ABS indicator lamp lights up
when you start up the electric drive system; if
it doesn't, the indicator lamp is faulty.
Accidents due to air in the hydraulic system
Less brake pressure can be generated due to air
in the system. This is particularly common after
the ABS activates. This may cause an accident
with serious injuries.

Pull on the brake before each ride to check if
you can reach a clearly noticeable pressure
point and ensure that the gap between the
brake lever and handlebar grip is sufficient
(about third of the way through the brake lever
path).
 If in doubt, place the lever path adjuster in the
maximum position possible.

Contact your specialist dealer if there is air in
the brake system.
Accidents due to manipulation
Manipulated or counterfeit ABS components
impair the ABS function. This may cause a crash
with serious injuries.
 Replace defective components with original
parts only.

Contact your specialist dealer if you require
maintenance work or repairs.
WARNING
!