14
6-2. Measurement Method
(1) Press the
key to turn on the power. All elements of the
LCD will be displayed for about 3 seconds. Subsequently, the
"calibration curve number," "TIMES," and "%" will be displayed.
* At this time, if the display shows something other than that described
above, there may be a problem with the unit. Refer to p.38, "8. Error
Display".
(2) Select a calibration curve from the included "calibration curve
list." Press the
key, and the calibration curve number will
start blinking. Enter a 2-digit calibration curve number.
<Example> Entering the value 03
Press the
key. The 1-digit will start blinking.
Then, press the
key again. "03" will be displayed.
* Please make use of the calibration curve list by affixing it to the battery
cover.
* Once the calibration curve is set, unless otherwise changed, it will be
maintained in memory even when the unit's power is turned off.
*The
symbol denotes a blinking display.
