16
(4) Press the
key, and the decimal point will start to blink.
After approximately 3 seconds, the buzzer will sound with a
"beep", and the "number of measurement times," the "moisture
value," and the "bar graph" will be displayed.
* The bar graph will display up to 25% full scale in 1% increments.
* When the moisture value is outside of the measuring range, "HI" will be
displayed if the value is higher than the measuring range, and "LO" will
be displayed if the value is lower than the measuring range.
(5) Remove the paper from the sensor.
At this time, the moisture value will remain displayed, but if mea-
surements will continue to be made, please start from "(3) Hold
the paper against the sensor electrodes in accordance with the
usage method for each sensor." When making measurements is
completed, press the
key, and turn off the power.
* With its auto power off function, the unit will automatically turn itself off
when inactive after approximately 5 minutes.
*The
symbol denotes a blinking display.
