15
(3) Hold the paper against the sensor electrode in accordance with
the usage method for each sensor. Keep the paper in position
until the measurement is complete.
<Grip sensor>
1. Hold onto the grip, and pull the lever up.
* When pulling the lever up, there may be a creaking noise, but this is
not unusual.
2. Insert paper in between the electrodes.
3. Loosen your grasp on the grip, and clamp the paper in by
lowering the lever.
<Rubber sensor>
1. Place the paper on top of the underlay (acrylic plate).
2. Hold the sensor against the paper.
<Pressure sensor>
1. Insert paper in between the electrodes of the pressure sensor.
2. Clamp the paper in by pushing down on the handle until it stops.
* When using the grip sensor or pressure sensor, be careful not to nip
your fingers.
Grip
Lever
Handle
Paper
Underlay
(acrylic plate)
