10
Tank-lifting station
Inlet connection
Saw off
connecting pieces
Transition
hose piece
Hose
clamp
Hose
clamps
Pipe connection
Supporting ring
4. Installation and assembly
Abb. C:
Abb. D:
A standard plastic pipe muff can be pushed over the connec-
ting piece (see Fig. C).
Alternatively, the connection of a plastic pipe with DN 100 for
the inlet or DN 70 for ventilation can be carried out using
connection clamps or rubber hoses with hose clamps*. To
prevent the high tension forces leading to deformation at the
connecting piece, a suitable supporting ring* must be pus-
hed into the upper end of the connecting piece (see Fig. D).
II. Connections attached to the pre-scored areas at
the side
(for inlet pipe or manual diaphragm pump) using
bore hole with saw cap*, fitting of a suitable greases seal*
and insertion of a suitable plastic pipe (see Fig. E)
* KESSEL accessory part
Tank-lifting station
Pipe duct seal
Pipe connection
Abb. E
O
p
e
n
in
g
d
ri
lle
d
Saw off con-
necting pieces