Kersten KM 13050 H-ABR 50, Руководство по эксплуатации

Страница: 11 / 20

Assembly
11
Image5
Image 3 Image 4
6. Saw off the profile tube. Attention: the profile tube must be 10 mm longer than
the protection. (image 3)
7. Repeat steps 4. - 6. on the second PTO shaft half.
8. Deburr all cut edges. (image 4)
10. Slide the profile tubes together.
Mount PTO shaft
1.
Press and hold the locking pins on the outer forks.
2. Slide the outer fork onto the PTO stub shaft.
3. Release the locking pin.
4. Move the PTO shaft back and forth until the locking pin clicks into place.
Image6
5. Hook the drive shaft safety chains to a fixed part on the tractor and the
implement.
Depending on the version, the machines are equipped with a hydraulic swiveling device. Insert the
hydraulic hoses into the hydraulic sockets provided on the tractor.
Pay attention to the cleanliness of the plug-in couplings.