Kersten KM 13050 H-ABR 50, Руководство по эксплуатации

Страница: 10 / 20

Assembly
10
7 Installation
7.1 Extension of KM 13050-22550 M-ABR 50 and KM 13050- 22550H-ABR 50
Danger!
Severe injuries to the operator or third parties may occur.
Switch off the tractor and remove the ignition key before mounting or dismounting the mounted sweeper.
Depending on the design of the front hydraulics, hook the FKM into the tractor implement triangle or the
two-point receptacle, whereby it may be necessary to adjust the connecting parts on the sweeping
machine side to the desired lifting height for the first time.
For easier mounting and dismounting of the FKM we recommend the two additional side parking supports
with wheels (special accessories).
7.2 Attachment of a KM 13050- KM 22550 M-ABR 50
Depending on the tractor type, the delivered PTO shaft may be too long. In this case, it must be shortened
according to the following steps.
Danger !
Damage to the attachment or to the tractor may occur. Use only the
supplied PTO shaft.
Note!
When installing the PTO shaft, also pay attention to the original instructions supplied by
the PTO shaft manufacturer.
Instructions for shortening and assembling the PTO shaft
Shortening the PTO shaft
1. Pull apart the cardan shaft halves.
2. Install one end of the PTO shaft on the tractor.
3. Attach the other end of the PTO shaft to the implement.
Image 1 Image 2
4. In the shortest working position, mark the piece to be sawn on one half of the PTO shaft. (Image 1)
5. Cut off the drive shaft guard to the mark. (Image 2 )