Service
13
Hydr
aulic
motor
sweeper
To the
sweeping
roller
Hydromotor
side brush
Hydrauli
c hose
return to
sweeper
side brush
Control
valve "A"
T
ee
For mounting the hydraulic tank
first the tank on the sweeper housing
(in the direction of travel on the right)
Screw in top of existing holes.
Screw the suction hose 15L between
the tank filter side and the bottom of
the pump.
Mount the pressure hose between
the control unit on the tank and the
top of the pump.
To install the side brush arm, screw the
mounting plate to the right of the sump
edge in the holes provided there.
Hook in the side brush arm with a bolt
and nut. Connect the two hydraulic hoses
between the side brush and the hydraulic
tank.
Circuit diagram: Control valve "A" is used to set the sweeping roller speed.
Control valve "B" is used to set the sweeping roller speed.
Note:
Before carrying out the test run, retighten all hydraulic connections and top up the hydraulic oil (see
above) in the tank!
Hydrauli
c hose
supply to sweeper
Содержание KM 13050 H-ABR 50
Страница 19: ...NOTE...