HyCut Mower
EN
2021-01-27
31 / 67
The mower is driven forwards /backwards (1) via the driving lever. The further the
lever (1) is moved forward or backward from the neutral position, the faster the
mower travels forwards or backwards.
Via the driving lever right / left (9) the direction of the mower is changed to the left
or right. The change of direction is due to speed differences between the left and
right rubber chains.
The potentiometer (8) allows the driving speed to be adjusted in the range of zero
to one hundred percent.
A speed difference between the left and right caterpillar drive can be set via the
trim device for driving on the slope (3). The use of the trim device can be useful for
trips across the slope.
The internal combustion engine is switched on or off via the switch internal
combustion engine (4).
The mower is switched on or off via the switch mower switch on / switch off (5).
The display (6) displays information about points.
•
Cutting height
•
Battery voltages
•
Operating hours
•
Knife drive on/off
The emergency stop switch (2) puts the mower in a safe, stopped state. The
electric drives for the two caterpillars, for the mulch mower and the cutting height
adjustment, as well as the internal combustion engine are switched off safely.
An inclination sensor (7) is installed in the radio remote control. If the operator
stumbles or falls, or the remote control is tilted more than 45°, the machine stops.
The status LED (10) gives feedback about the current status of the wireless remote
control.
