Colposcope Digital Imaging System
39
Chapter VI Maintain and Maintenance
To ensure the equipment works well, extend equipment life, please pay attention to
the maintenance and maintenance.
6.1 Maintenance of equipment and accessories
To ensure the normal safety, equipment and accessories should be accepted a
preventive check-ups for every 6 months (including the performance of inspection and
safety inspection)and maintenance, this in order to prove that the equipment work
properly good and in good working condition, for that the medical staff and patients are
safe and meet the required clinical accuracy.
1. Ensure that the equipment grounding good.
2. Note that the local power grid voltage fluctuations, if beyond the allowable
range, proposed a new regulation equipment.
3. Do not open the case of the equipment without permission ,in order to avoid
undue troubles.
4. accessories shall be gently to take, do not throw, hit, pull, do not containing
corrosive chemicals wipe!
5. To reduce the times to plug of the annex to extend its service life.
6. Camera equipment should be placed in a clean, dust-free and stable place.
Our company does not make warranty if the lens caused by the fault.
7. Camera equipment should be installed in rigid packaging of the box, fiber
bending angle is not too large, so as not to break optical fibers, optical fiber
bend radius of not less than 50mm.
8. When equipment do not use,please covering the dust cover
9. Equipment and accessories shall be inspected at the hospital in accordance
with the provisions of the calibration cycle, please contact the manufacturer
after the examination period. Recommend that users check in daily operation
of equipment and accessories to make some treatment; and do a
文件使用
"pdfFactory Pro"
试用版本创建
