KEP MINI-BATCHER MB2, Инструкция по установке и эксплуатации

Страница: 13 / 26

9
DEFINITIONS OF MENU PROMPTS
The following is a list of abbreviations as they appear on the display and front panel of the unit.
ABBREVIATION DESCRIPTION
PRE B
PRESET B - This is the setpoint for Relay B. Preset B can be used as a Prewarn or Grand/Batch Total
alarm.
FACTOR
SCALING FACTOR - This portion of the menu is used to set the 5 digit dividing scale factor for the count
input.
DP F A
DECIMAL POINT FOR FACTOR A - Enter location of decimal point for scaling Factor A by pressing the
button under the digit where the decimal is desired.
COUNT
PORTION OF MENU FOR SETTING COUNTER VARIABLES
RST 0
RESET TO 0 - Counter will reset to 0. The Batcher will count up from 0.
SET PR
SET TO PRESET - Counter will reset to preset A. The Batcher will count down from preset A.
DP LOC
DECIMAL POINT LOCATION - Enter desired location of decimal by pushing the button under the digit
where the decimal is desired. Changing the decimal will change the decimal location in the counters ,
presets and rate display.
gr tot
GRAND TOTAL- This sets the second counter to count the Grand Total.
ba tot
BATCH TOTAL- This sets the second counter to count the number of Batches.
HI CPS
HIGH COUNTS PER SECOND - This sets the unit for high count speeds (0-9.99 kHz)
LO CPS
LOW COUNTS PER SECOND – This sets the unit for contact debounce filtering (0-40 Hz)
RATE
PORTION OF MENU FOR SETTING RATE VARIABLES
sec
SECONDS - The rate display will read in rate per second.
mins
MINUTES- The rate display will read in rate per minute.
hours
HOURS - The rate display will read in rate per hour.
NOR##
NORMALIZING FACTOR - Normalizes (averages) the data being received. Higher settings provide more
normalizing (averaging) for a more stable display. Derived from the equation:
(Old Data x "NOR" + New Data)
("NOR" + 1)
FIGUR ##
SIGNIFICANT FIGURE - This sets the amount (1-5) of meaningful figures the unit will display. (RATE DIS
PLAY ONLY). FOR EXAMPLE: If "2" is set as the figure, a rate of 273.45 will be displayed as 270.