manualshive.com logo in svg

Keofitt W9, Руководство пользователя, Страница: 12 / 50

Поделиться
Скачать
Keofitt W9 Скачать руководство пользователя страница 12

KEOFITT W9 USER MANUAL V.4 

PAGE 12

3. VALVE DESIGN AND FUNCTIONING

The Keofitt sampling valve is conceived to extract representative samples from a production process 

at regular intervals during a batch without compromising the ongoing process. The valve is therefore 

designed such that effective cleaning, disinfection/sterilisation and sampling can be carried out regularly 

without disturbing the production process.

3.1 Valve body configurations

Valve bodies may be welded to the process equipment or connected by means of one of the standard 

connector systems.

Welding configurations encompass the following options:

 

• 

Tank welding, ø28 mm

 

• 

Pipe welding, 1”

 

• 

Pipe welding, NW25

 

• 

In-line vertical

 

• 

In-line horizontal 

Connector configurations encompass the following options:

 

• 

Varivent, ø50 mm

 

• 

Varivent, ø68 mm

 

• 

Clamp ½”

 

• 

Clamp 1"; Clamp1", NA-connect, DIN/ASME

 

• 

Clamp 2"; Clamp2", NA-connect, DIN/ASME

  • Thread

 

• 

DIN 11851

The inlet and outlet ports are available in the following configurations:

 

• 

Hose Piece (Keofitt Quick Coupling)

 

• 

Mini Tri-clamp

 

• 

Thread M16x1.5

 

• 

Welding ends (to weld steel tubing on)

All welding/connector options are available with Hose Piece ports. For the other port configurations 

only some combinations are standard; but all non-standard combinations are likely to be available “On 

request”.

All valve bodies with their various ports are machined in one piece of steel, thus avoiding all crevices and 

fissures from screwed or welded parts.

For further information please consult www.keofitt.dk.

3.2 Valve surfaces and roughness certificate

All Keofitt valves are electro polished internally using a proprietary technique and each valve has its 

individual certificate (Test Report) stating the results of 4 test measurements of the surface roughness in 

each of the 2 ports, in the valve chamber and on the outer body surface with product contact.

For obvious reasons, the surface properties of the internal product contact areas of a sampling valve is 

much more important from a hygiene perspective than any shiny outside surface appearance. Therefore, 

Keofitt has developed a unique electrode configuration to assure during manufacturing that the internal 

surfaces in particular are properly electro polished. 

Содержание W9



















































Отзывы:

Нет отзывов